Gate Installation in Hanford, CA — Driveway Gates, Pedestrian Gates, and Automated Gates

Gate Installation and Repair in Hanford

I install and repair driveway gates, pedestrian access gates, and security gates in Hanford and throughout Kings County. Wood, vinyl, chain link, and ornamental iron. Manual swing gates and automated slide or swing systems. Every gate installation starts with proper post sizing and footing depth — the most common mistake in gate work that causes sag and failure within a few years.

Why Gate Posts Require Special Attention in Hanford

Gate posts carry significantly more load than line posts — the dynamic weight of the gate moving, wind loading on a solid-panel gate, and repeated impact from operation all concentrate on those two posts. I use larger diameter posts, deeper footings, and reinforced hardware on every gate installation in Hanford. It costs a bit more. It's the difference between a gate that works smoothly for 15 years and one that sags within 3.

Driveway Gates in Hanford

I build and install single and double driveway swing gates for residential and commercial properties in Hanford. Wood (cedar or redwood, matching the fence), vinyl, ornamental iron, and chain link slide gates for wider openings. Standard residential driveway opening is 10–14 feet; commercial can run to 20+ feet. Double swing gate on a 12-foot opening requires careful post placement and adequate concrete footings for the weight. I do it right.

Automated Gate Systems

I install gate openers — swing and slide — for both residential and commercial gates in Hanford. I partner with a licensed electrician for the power supply and control wiring. Popular systems: LiftMaster and Viking Access for commercial-grade swing and slide operators. Keypad, remote, and vehicle loop detector entry systems are all available. I handle the mechanical installation and gate hardware; the electrician handles the power and controls as a coordinated subcontractor.

Pedestrian Gates in Hanford

Side yard access gates, pool barrier gates (which must meet California pool code), and pedestrian entries through privacy fences. Pool gates in Hanford require specific hardware: self-closing, self-latching, with the latch on the pool side at the correct height. I build pool gates to California code requirements — this is not an area where I cut corners or let clients cut corners.

Gate Repair in Hanford

Sagging gates, broken latches, hinges pulling from posts, gates that won't close properly — I fix these throughout Kings County. Most sagging gate fixes involve either post reset (if the post has moved) or hinge reinforcement with larger hardware. If the gate frame itself is compromised, a new gate is usually the better investment. I'll assess it at the site visit and give you both options with pricing.

Gate Costs in Hanford

Single pedestrian gate (wood or vinyl): $400–$900 installed. Double driveway swing gate (wood, 12 feet): $900–$2,000 installed depending on material and hardware. Chain link slide gate (commercial): quoted by size and application. Automated gate opener add-on: $1,200–$3,500 depending on gate type, motor, and entry system. All prices in writing before work starts.

Frequently Asked Questions — Gate Installation in Hanford

Does my pool gate need to meet specific requirements in Hanford?

Yes. California law requires pool barrier gates to be self-closing and self-latching, with the latch positioned on the pool side at a minimum height. The gate must swing away from the pool (out). I build pool gates to these requirements on every Hanford installation.

How long does gate installation take?

Manual gate only: usually 1 day. Automated gate system: 1–2 days for mechanical, plus a separate day for electrician's work. I'll give you a specific timeline in the written quote.

Can you automate my existing gate in Hanford?

Often yes — if the gate is structurally sound and the posts are set right. I'll assess the existing gate and posts before recommending automation. If the posts or gate aren't up to supporting an opener, I'll tell you that and quote a rebuild along with the automation.

Get a Free Gate Quote in Hanford

Call me or use the contact form. I'll come out to your Hanford property, look at the site, and give you a written price. Free visit, straight quote.